Solar limits

Something unexpected with my solar power setup: the cable loss is limiting the power produced by the panel, but it’s due to the voltage drop and not the power loss.

The cable is ~20 m of 1 mm2 flex for a total of 0.71 Ω. The peak power point of the panel is 34.3 V and the Victron charge controller needs 30.1 V to charge an 8S LiFePO4 battery.

This means the maximum current is I = (34.3 - 30.1) / 0.71 = 5.9 A, which is 34.3 * 5.9 = 202 W generated, 24 W of loss, and 178 W delivered.

Power delivered versus generated

Changing to 2.5 mm2 flex will cut the resistance to 0.28 Ω, ups the current to 9.2 A, and deliver 291 W.

Avatar
Michael Hope
Software Engineer